Home Products Steels and Alloys Non-Ferrous Alloys for Moulds and General Mechanics

Moldmax LH

detalhe

Description

Non-Ferrous Copper Alloy-Beryllium. It has a hardness and resistance equivalent to 1.2311 but with a thermal conductivity 5 times higher. Typical applications are plastic injection moulding inserts or recesses, where moderate hardness, toughness and conductivity are requirements.

Main applications

  • Die Casting
  • Mouldings and Cuts
  • Blast Moulds
  • Blades and Cutting Rings

Delivery status

Hardened by Precipitation

Hardness of the supply

  • Min: -
  • Med: -
  • Max: 290 HB
  • Composition
  • Services
  • Heat Treatments
  • Download

Profiles available

Thickness Tolerance
Round 20 - 115 mm
Rectangular < 304,8 mm

Chemical composition (%) 1

Min Med Max
Cu
Restante
Be
1,60 2,00

Physical properties

Density : 8,36
10ˉ⁶m/mK
20 a 100 ⁰C 20 a 200 ⁰C 20 a 300 ⁰C 20 a 400 ⁰C 20 a 500 ⁰C 20 a 600 ⁰C 20 a 700 ⁰C
17,5 --- --- --- --- --- ---
Thermal Conductivity W/mk
20 ⁰C 200 ⁰C 300 ⁰C 350 ⁰C 400 ⁰C 600⁰C 700 ⁰C
--- --- 155 --- --- --- ---
GPa
-100 ⁰C 0 ⁰C 20 ⁰C 100 ⁰C 200 ⁰C 300 ⁰C 400 ⁰C 500 ⁰C 600 ⁰C
--- --- 131 --- --- --- --- --- ---

Mechanical properties

Condition Ø Thickness Mechanical properties
Hardness Rm Rp0,2 ReH RC A Z
Hardened and tempered - - - - - - - - -
Drawn (+C) - - - - - - - - -
Ground (+SH) - - - - - - - - -
N/A - - - - - - - - -
Hardened and tempered - - - - - - - - -
Drawn (+C) - - - - - - - - -
Ground (+SH) - - - - - - - - -
N/A - - - - - - - - -
Hardened and tempered - - - - - - - - -
Drawn (+C) - - - - - - - - -
Ground (+SH) - - - - - - - - -
N/A - - - - - - - - -
Hardened and tempered - - - - - - - - -
Drawn (+C) - - - - - - - - -
Ground (+SH) - - - - - - - - -
N/A - - - - - - - - -
Hardened and tempered - - - - - - - - -
Drawn (+C) - - - - - - - - -
Ground (+SH) - - - - - - - - -
N/A - - - - - - - - -
Hardened and tempered - - - - - - - - -
Drawn (+C) - - - - - - - - -
Ground (+SH) - - - - - - - - -
N/A - - - - - - - - -

Notes on mechanical properties

The hardness value is part of the specification of the material.

You can print this information
Updated on: 09.05.2022
  • Composition

    Profiles available

      • Round
      • 20 - 115 mm
      • Rectangular
      • < 304,8 mm

    Chemical composition (%) 1

    Min Med Max
    Cu
    Restante
    Be
    1,60 2,00

    Physical properties

    Density : 8,36
    10ˉ⁶m/mK
    20 a 100 ⁰C 17,5
    20 a 200 ⁰C ---
    20 a 300 ⁰C ---
    20 a 400 ⁰C ---
    20 a 500 ⁰C ---
    20 a 600 ⁰C ---
    20 a 700 ⁰C ---
    Thermal Conductivity W/mk
    20 ⁰C ---
    200 ⁰C ---
    300 ⁰C 155
    350 ⁰C ---
    400 ⁰C ---
    600⁰C ---
    700 ⁰C ---
    GPa
    -100 ⁰C ---
    0 ⁰C ---
    20 ⁰C 131
    100 ⁰C ---
    200 ⁰C ---
    300 ⁰C ---
    400 ⁰C ---
    500 ⁰C ---
    600 ⁰C ---

    Mechanical properties

    Please refer to the table in the downloads section.

    Notes on mechanical properties

    The hardness value is part of the specification of the material.

  • Services
  • Heat Treatments
  • Download

Advanced Search

Hardness HB

Hardness HRC

Resistance to abrasive wear

Resistance to adhesive wear

Resistance to tempering

Resistance to heat wear

Resistance to fatigue

Compressive strength

Toughness

Ductility

Corrosion resistance

Machinability

Suitability for welding

Suitability for polishing

Thermal fatigue

Suitability for nitriding

Suitability for texture

Number of cycles (Durability)

Creep resistance

Hardenability

Find products

If you do not find the configuration you are looking for, please see Advanced Search.

Advanced Search
Quote Request