AISI 310S (1.4845)

detalhe

Description

Austenitic stainless steel known for its high resistance to corrosion at high temperature, it can be used up to 1100ºC in oxidizing atmosphere. It can also be used in carburizing, nitriding and sulphunization atmospheres, although at moderate temperatures. It shows very good weldability.

Main applications

  • Pyrometers and burners
  • Valves for corrosive gases
  • Muffles and components for industry
  • Food industry in contact with citric and acetic acid

Delivery status

Austenitic

Hardness of the supply

  • Min: -
  • Med: -
  • Max: -
  • Composition
  • Services
  • Heat Treatments
  • Download

Profiles available

Thickness Tolerance
Round 10 - 100 mm EN 10060
Plate 1 - 12 mm EN 10051

Chemical composition (%) 1

Min Med Max
C
0,20
Si
1,50 2,50
Mn
2,00
P
0,045
S
0,015
Cr
24,00 26,00
Ni
19,00 22,00

Physical properties

Density : 7,90
10ˉ⁶m/mK
20 a 100 ⁰C 20 a 200 ⁰C 20 a 300 ⁰C 20 a 400 ⁰C 20 a 500 ⁰C 20 a 600 ⁰C 20 a 700 ⁰C
--- 15,5 --- 17,00 --- 17,5 ---

Thermal Conductivity W/mk
20 ⁰C 200 ⁰C 300 ⁰C 350 ⁰C 400 ⁰C 600⁰C 700 ⁰C
15,00 --- --- --- --- --- ---

GPa
-100 ⁰C 0 ⁰C 20 ⁰C 100 ⁰C 200 ⁰C 300 ⁰C 400 ⁰C 500 ⁰C 600 ⁰C
--- --- 210 --- --- --- --- --- ---

Mechanical properties

Condition Ø Thickness Mechanical properties
Hardness Rm Rp0,2 ReH RC A Z
Hardened and tempered ≤ 160 - - - - - - - -
Drawn (+C) ≤ 160 - - - - - - - -
Ground (+SH) ≤ 160 - - - - - - - -
N/A ≤ 160 - - - - - - - -
Hardened and tempered - - - - - - - - -
Drawn (+C) - - - - - - - - -
Ground (+SH) - - - - - - - - -
N/A - - - - - - - - -
Hardened and tempered - - - - - - - - -
Drawn (+C) - - - - - - - - -
Ground (+SH) - - - - - - - - -
N/A - - - - - - - - -
Hardened and tempered - - - - - - - - -
Drawn (+C) - - - - - - - - -
Ground (+SH) - - - - - - - - -
N/A - - - - - - - - -
Hardened and tempered - - - - - - - - -
Drawn (+C) - - - - - - - - -
Ground (+SH) - - - - - - - - -
N/A - - - - - - - - -
Hardened and tempered - - - - - - - - -
Drawn (+C) - - - - - - - - -
Ground (+SH) - - - - - - - - -
N/A - - - - - - - - -

Notes on mechanical properties

The hardness value is part of the specification of the material.

  • Composition

    Profiles available

      • Round
      • 10 - 100 mm
      • EN 10060
      • Plate
      • 1 - 12 mm
      • EN 10051

    Chemical composition (%) 1

    Min Med Max
    C
    0,20
    Si
    1,50 2,50
    Mn
    2,00
    P
    0,045
    S
    0,015
    Cr
    24,00 26,00
    Ni
    19,00 22,00

    Physical properties

    Density : 7,90
    10ˉ⁶m/mK
    20 a 100 ⁰C ---
    20 a 200 ⁰C 15,5
    20 a 300 ⁰C ---
    20 a 400 ⁰C 17,00
    20 a 500 ⁰C ---
    20 a 600 ⁰C 17,5
    20 a 700 ⁰C ---

    Thermal Conductivity W/mk
    20 ⁰C 15,00
    200 ⁰C ---
    300 ⁰C ---
    350 ⁰C ---
    400 ⁰C ---
    600⁰C ---
    700 ⁰C ---

    GPa
    -100 ⁰C ---
    0 ⁰C ---
    20 ⁰C 210
    100 ⁰C ---
    200 ⁰C ---
    300 ⁰C ---
    400 ⁰C ---
    500 ⁰C ---
    600 ⁰C ---

    Mechanical properties

    Please refer to the table in the downloads section.

    Notes on mechanical properties

    The hardness value is part of the specification of the material.

  • Services
  • Heat Treatments
  • Download

Advanced Search

Hardness HB

Hardness HRC

Resistance to abrasive wear

Resistance to adhesive wear

Resistance to tempering

Resistance to heat wear

Resistance to fatigue

Compressive strength

Toughness

Ductility

Corrosion resistance

Machinability

Suitability for welding

Suitability for polishing

Thermal fatigue

Suitability for nitriding

Suitability for texture

Number of cycles (Durability)

Creep resistance

Hardenability

Find products

If you do not find the configuration you are looking for, please see Advanced Search.

Advanced Search